Page 4/7
Drive the defective truck onto the collecting tub.
The walls of the pneumatic collecting tub must
remain free and must not be loaded in any way!
Open the pressure regulator and start ination. Close the hand
valve when the operating pressure is reached.
4.3 Pumping o the collected uid
To pump o the collected uid, use a commercially availab-
le immersion pump (comply with the resistance), e.g. item no.:
1520041600 dewatering pump. For complete vacuum withdra-
wal, if necessary the suction nozzle (Item no.: 1700014701) can be
used in combination with a Vetter aspirator.
4.4 Deating and Packing
The deation of the support frame happens over the ination
connection. To deate the tub, close the air source (compressed
air cylinder, etc.) and disconnect the pressure reducer. Screw the
cap o of the lling connection in the counter-clockwise direc-
tion. The deation valve is opened by pressing-in and turning the
pin (1) counter clockwise.
1
Pin before locking Pressing-in + turning Valve open
Comments to this Manuals