Vetter Decon tent User Manual download pdf (Page 8)

Vetter Pneumatic Decon Tents

Page 7/11

4.5 Deation

The deation of the support frame happens over the ination connec-

tion. To deate the tent, close the air source (compressed air cylinder,

etc.) and disconnect the pressure reducer or the lling hose of the blo-

wer. The deation valve is opened by pressing-in and turning the pin (1)

counter clockwise.

Pin before locking Pressing-in + turning Valve open

Fold the tent in the way, that the air can escape (Folding to the direction

of the ination connection). Any remaining air can be removed with a

vacuum adaptor (Item No.: 1700018300) in combination with an const-

ruction-site compressor adaptor (Item No.: 1600012000).

Connect the construction-site compressor adaptor (1) to the coupling

of the vacuum adaptor (2) and turn it interlocking. Then tighten the

screwable part of t the vacuum adaptor. Now connect the construction-

site compressor adaptor to the support frame. Attach the quick-action

coupling (3) to the connection hose of the pressure regulator and open

the hand valve of the pressure regulator slowly.

It is also possible to deate the support frame with a blower with deate

function. Follow the operating instructions of the blower.

After deation and before packing, the valve

must be unlocked again in order to guarantee

perfect ination when it is next used!

1 2 3 4 5 6 7 8 9 10 11 12

No comments

Vetter Decon tent User Manual Page 8